top of page
Screwdriver - Long Flat
IMG_20210601_1845563_edited.jpg
IMG_20210525_1745244 copy.jpg

Note the two different length tips

late1660.jpg
Bstubby.jpg
Writing%20On%20Jorg_edited.jpg
jorglogo.jpg
bphillips.jpg
IMG_2066.JPG
IMG_2001_edited.jpg
IMG_2068.JPG
IMG_2067.JPG
IMG_2073.JPG
IMG_2074.JPG
IMG_2071.JPG
IMG_2075.JPG
IMG_2072.JPG
Screwdriver - Long Flat

Shaft: No Marking OR JÖRG Nr. 1660/1

Ferrule: pin AND crimped

Tip: no marking

Length: 235mm (237.51, 240.96, 250mm measured)

Decal: no decal

Handle: Dark Red with painted flutes

Screwdriver - Stubby

Shaft: no marking

Ferrule: no pin

Tip: keystone tip

Length: 100mm (101.30m measured) 

Decal: no decal

Handle: Red 

Screwdriver - Phillips

Shaft: Chrom-Van near tip

Ferrule: crimped, no pin

Tip: phillips tip

Length: 210mm (206.96, 213.84mm measured)  

Decal: no decal

Handle: Red 

The only item added to this for the photo was a NOS spark plug, otherwise, this is a completely original kit. Click on the image to enlarge. (photo taken in 1/2021)

Screwdriver - Long Flat
Screwdriver - Phillips
Screwdriver - Stubby

This Toolkit came from a 1962 car, and was found in a Blue Tool Bag.

It is unclear if the screwdriver set found in this toolkit belongs to a late 1961 356B or to an early 1962 356B.

 

Discussion: The Long Flat appeared late 1961. The Philips appeared late 1960. Given these two pieces of information, this is most likely a 1961 kit, that carried over until stock was used up into a 1962 car. The set was complete as seen in the photo below (edited March 6, 2023):

IMG_2076.JPG
bottom of page